宁波鸿达电机模具有限公司 NINGBO HONGDA MOTOR DIE CO., LTD
展位号:2028 展出产品:大型扇形片落料复合模、 D44.2mm汽车电机三列大回转级进模、D110mm压缩机电机三列自扣级进模等 联系方式:0574-63537090 网址:www.hongdamuju.com 邮箱:gkq@hongdamuju.com
公司简介
宁波鸿达电机模具有限公司创建于1988年,专业制造电机铁芯冲片级进模及单冲模,通过ISO9001质量管理体系认证,年产200副级进模及6000副定转子片单冲模,所涉应用领域几乎囊括所有电机行业。
Ningbo Hongda Motor Die Co., LTD, founded in 1988, specialized in manufacturing motor core lamination progressive die and compound die. ISO 9001 Quality Management System Certificated. Its annual capacity is 200 sets of progressive dies and 6000 sets of single punching dies which are widely used in all kinds of motor manufacture industry.
部分展品
1、大型扇形片落料复合模 Large segment blanking compound die
产品介绍
模具尺寸:800X600X500mm 模具材质:SKD11 模具寿命:500万冲次 应用:风力发电机、水力发电机冲压
Die size: 800 X 600 X 500 mm Die Material: SKD 11 Die life: 5 million times of stroke Use: Aerogenerator, Hydraulic generator stamping
2、D44.2mm 汽车电机三列大回转级进模 D44.2mm car motor three large rotary progressive die
产品介绍
模具尺寸:800X500X400mm 模具材质:硬质合金 模具寿命:2亿冲次 应用:汽车电机冲压
Die size:800 X 500 X 400 mm Die Material:Cemented carbide Die life:200 million times of stroke Use:Automotive motor stamping
3、D110mm 压缩机电机三列自扣级进模 D110mm compressor motor three from the buckle progressive die
产品介绍
模具尺寸:2000X800X420mm 模具材质:硬质合金 模具寿命:2亿冲次 应用:变频空调压缩机冲压
Die size: 2000 X 800 X 420 mm Die Material: Cemented carbide Die life: 200 million times of stroke Use: Frequency conversion air conditioning compressor stamping |